I have done better this year at getting words put down than I did last year, and have managed to get around 1600 words added so far this month.
It's a big shame that the target is to have 50,000 words by the end of this November, and to achieve this I need to have written an average of 1667 words a day. My average so far is 146.
At this rate I will finish around 9th October 2014. Just in time to start next year's novel.
Not going to say much more at the moment, I'm going to have a go at putting some more ink on paper.
Monday, 11 November 2013
Sunday, 29 September 2013
Wine, coding, pizza and enumerize
Wine
Drunk Coding: Safer than Drunk Driving, but only just. |
For some reason, we didn't finish a bottle of wine last night, although to be fair we did have three glasses each, so I thought I'd better finish the bottle before it goes off.
Coding
I'm doing a little bit more coding on my game tracking application, and have found a link to a git branching model that appears useful, I'm going to have a good think about it and will try putting it in place.I'm also looking into using the enumerize gem with the app to reduce the amount of database calls - I am only going to be tracking two versions of the game for the moment, so this sort of makes sense.
Pizza
In a random conversation about drunk coding, I jokingly mentioned a pizza. Then realised I really do fancy one. I'm trying to be good, so might make do with a bacon buttie instead. Although I'm still thinking about the pizza. I was thinking if I wait long enough, they'll all be shut and problem solved. Then I remembered that one chain is open until 5am.I need to be in bed long before then though.
I must resist.
Saturday, 24 August 2013
lolcommits
Every now and again I look at the lolcommits gem, this allows a git user to take a snapshot each time that they commit code to their repository.
The only bit it took me a while to work out was the correct way to get the twitter option to post.
After some playing around I discovered the following sequence usually works:
lolcommits -p twitter --config
and type true when you get the prompt
enabled:
Once you have committed to your repo, then type
lolcommits -c
this will take a fresh screenshot from your latest commit and give you a url to authorise the tweet activity. Enter the url into a browser, then paste the code into the command prompt and all your future commits will be sent to annoy your followers.
Examples of this hideous idea are here (how many of these places do you recognise?):
The only bit it took me a while to work out was the correct way to get the twitter option to post.
After some playing around I discovered the following sequence usually works:
lolcommits -p twitter --config
and type true when you get the prompt
enabled:
Once you have committed to your repo, then type
lolcommits -c
this will take a fresh screenshot from your latest commit and give you a url to authorise the tweet activity. Enter the url into a browser, then paste the code into the command prompt and all your future commits will be sent to annoy your followers.
Examples of this hideous idea are here (how many of these places do you recognise?):
Sunday, 7 April 2013
Delays, Combs and Pitch
Introduction
Today I am going to talk a about the delay spectrum, showing examples of comb filtering, creating pitches with delays, slapback delays and synchronized long delays.The Delay Spectrum
Terms used in delay effects
The delay time is how long the signal is delayed before being mixed in with the original signal.We have dry and wet signals in filtering. A wet signal is the delayed signal. The dry signal is the undelayed signal.
Feedback is how much of the wet signal is returned back to itself. This is a gain stage and increases the amount of feedback that can be heard, and the time that the signal will continue to be heard.
Comb Filtering
Comb Filter Frequency Response Diagram |
In this diagram, you can see the comb like signal. There is a 1mS delay between the original signal and both wet and dry signals are at 0dB. Where the two signals peak together, you can see that signal have been increased by 6dB. Where the signals are opposite there is around a 100dB notch.
Creating Pitches with Delays
With feedback applied and a 1mS delay, a clicking signal will appear to have a pitch caused by the addition of the dry signal with the fed back wet signal. If the delay is slowly increased, the pitch will appear to have a lower frequency. This relationship between the delay and the percieved pitch is a core part of generating electronic music.Slapback Delay
A slapback delay has a medium delay time, typically between 75 and 250mS with very little or no feedback. This gives the effect of having sound reflecting from a wall with no additional echo's, or in other words making a similar sound to a room.Synchronised Long Delays
A long delay gives a distinct echo to the sound, that matches what we would find in nature. It is important to synchronise the delay to the underlying musical content, in time with the quater notes for example.To aid the listener, the wet signal needs to sound distinct to the dry original signal. A long delay can clash with harmonies and complex rhythms, so long delays need to be applied carefully and only after ensuring that the delay enhances the musical experience.
Reflection
Although a delay is a very simple concept, in actuality they are very complex effects to set up and make a usable and beneficial improvement to a song.
I would like to thank those of you that have read through and commented on my work, and wish you well with your coursework. I am finding it hard to believe that we're rapidly approaching the end of this course!
Sunday, 31 March 2013
Dynamic Range
Introduction
Welcome to my week 4 assignment for the Music Production course. Today I am going to look at Dynamic Range and some methods a producer can use to manipulate it.Dynamic Range
This is simply the difference between the loudest and the quietest sounds in a recording.
The musicians give a natural dynamic range by following their score and playing louder or softer during their performance. The post-production work adjusts the dynamic range to give more feel to the music.
There are a number of areas where dynamic range can be adjusted:
- Macro Scale>
- Transients
- Compression
- Expansion
- Dynamic Processors
The Macro Scale
The producer will look at the overall performance, and will see the relative levels between sections of the recording. They will ride the fader and automate the volume levels to strengthen the difference between verses and the chorus.Transients
A transient is where the amplitude changes a lot during a short timescale. Examples of transient sounds include snare hits.Compression
Compression reduces the dynamic range and brings volume levels to all the parts of the music into a similar level.Expansion
Expansion increases the dynamic range, and gives more emphasis to sections of the music, either by bringing the perceived volume level up or down.Dynamic Processors
A producer will use a dynamic processor to adjust the level of the audio following rules. Expanders, gates, compressors and limiters are types of dynamic processors.Threshold
The point that a dynamic processor starts taking effect is known as the threshold. This is measured in dB, and a lower threshold (eg -30dB) means a large portion of the signal will be affected compared to a higher threshold of -5dB.Ratio
The ratio is how much the processor changes the level once the threshold has been passed. The higher the ratio, the more the signal will change.A ration of 6:1 means that if the input level is 6dB over the threshold, the output signal will be 1dB over threshold. The gain in this case has been reduced by 5dB.
Attack and Release
Attack and release provide a measure of control over how quickly a compressor acts.The attack phase is the time when the compressor is decreasing gain to match the level that is set by the ratio. The release phase is when the compressor is increasing gain once the level has fallen below the threshold.
A compressor's attack and release are measured in mS, the time that it takes the gain to change a set amound of dB.
Soft and Hard Knees
The knee is how quickly the effect takes place. A soft knee slowly increases the compression ratio as the level increases and eventually reaches the compression ratio set by the user. The softer knee's reduces the audible change from uncompressed to compressed, especially for higher ratios.Compression
A downward compressor reduces loud sounds over a certain threshold while quiet sounds remain unaffected.An upward compressor will increase the loudness of sounds below the threshold while leaving louder sections unchanged.
Both downward and upward compression reduce the dynamic range of an audio signal.
Expanders
An expander increases the dynamic range of an audio signal, and typically are used to make quiet sounds even quieter by reducing the level of the signals that fall below a set threshold level.
A noise gate is a type of expander.
Reflection
I have given a brief introduction to Dynamic Range and the ways that a producer can change the level of a song.The one thing the producer must consider about above all else is that the essential character of the music is not changed.
I would like to thank you for taking the time to read my discussion on Dynamic Range. There is so much to learn about the topic, and it will take a lifetime to fully understand the practical aspects.
Sunday, 24 March 2013
Mixing Desks - The Channel Strip
Introduction
Alto ZMX164FX USB Mixing Desk |
Mixing boards look really complicated, but they are modular devices and contain a number of repeated sections.
This board has 12 channel strips, four subgroups, a special effects section, the monitor section, and the main mix fader.
The sections of the board are shown in the diagram to the right.
This lesson is going to focus on the signal flow through the channel strip. I am also going to briefly discuss where the signals go after leaving the channel strips - the sub and main mixes.
The Channel Strip
As a rule, signals flow from the top to the bottom of the channel strip, although there are a couple of exception to this rule, they will be described later.
I am going to describe the mono input channels 1-8, on this mixer channels 9-16 are stereo inputs and are have slightly different operation.
Although the inputs are mono, the output after the fader are a stereo signal.
The Input
Inputs |
The signal starts with the microphone or line input at the top. The line inputs are TRS balanced/unbalanced inputs.
The insert is to allow connecting an external effects rack into the mix using a TRS connector.
The line gain allows the level to be adjusted to line level. This is different to a DAW, as the DAW expects the signals to already be at line level.
The peak led illuminates if the signal should rarely, if ever, light otherwise you will have distorted signals from the very start.
The low-cut button switches in a 75Hz low frequency filter to reduce hum from a mains power supply or stage rumbles.
The Equaliser
Signal Routing |
The blue knobs are a 3-band EQ with a sweepable MID range.
Aux Sends
The Aux Sends can be thought of as a separate mix
The yellow knobs are the auxiliary sends level controls. These control the signal levels to the two auxiliary bus.
AUX1 and AUX2 can be switched to pre or post fader and can be used for monitor or inputs to an effects and sound processor.
AUX 3 and AUX4 are configured as post faders. AUX4 can be assigned to the onboard effects module.
The PAN control is used to position the signal to the left or right side. In the central position the audio will appear in the centre of the stage. This is also an out of order signal flow.
The Fader Section
Channel Fader and Options |
The mute button is equivalent to pulling the fader down, and causes the mute led to illuminate.
The channel can route to sub 1-2, sub 3-4, and the Main LR busses.
The solo button routes the signal from the channel to the control room.
Finally, the fader controls the overall level of the signal sent out to the main and sub busses. On this board, the unity gain is marked with a 0. The fader allows from -∞ to +15 db. The ∞ means that effectively no signal will be heard from the channel.
Ideally you want to keep signals around unity as much as possible, this gives the least risk of distortion occurring in your work.
The DSP
DSP Options |
The mixer has a 24 bit digital special effects unit that can add flangers, reverb, chorus, delay and combinations of these. There are 16 preset options for each effect selected.
The effects out control is the signal sent to DFX OUT and can be set between -∞ to +10 db.
The AUX1 and AUX2 controls are used to set the signal level from AUX Return 4 on the channel strip to the AUX Send1 and 2. The range is between -∞ to +15 db.
The Peak LED illuminates if the input signal is too strong. The DSP can be muted, and this causes the peak LED to illuminate.
The board power and phantom power indicators can also be seen on this picture.
The Equaliser
Graphic Equaliser |
The board has a nine-band graphic equaliser, and a bypass button.
This allows the fine-tuning of the overall output audio levels.
Sub groups and Main Mix
Subgroups and Main Mix Faders |
This is where the output from all of the channels appears.
The four white sub faders control the levels for each of the sub channels.
The red fader is the main mix, the output that your audience are listening to. This board controls the overall level, unlike some that can control the individual left and right levels.
The channel that each of the sub groups appears on the main mix is controlled by the assign to main mix buttons.
Subgroup assignment |
Pressing the LEFT button will assign the subgroup to the left main mix, the RIGHT sends to the right main mix, and having both selected will send to both channels.
Reflection
I have focussed on the parts of the board that I have used, the only section I haven't discussed are the auxiliary sends and returns. Apart from the built in DSP, I don't have any equipment to connect and experiment with (donations gratefully accepted!)
Creating the lesson has helped me understand the operation of my board in more detail, in particular how the special effects unit operates.
Creating the lesson has helped me understand the operation of my board in more detail, in particular how the special effects unit operates.
I would like to thank you for your time in reading my lesson on the Channel Strip, and I hope you have gained as much as I have (so much so, that I'm tempted to create lessons on some of the other options for this assignment).
Now I want to go and put theory into practice - apologies to my neighbours!
Now I want to go and put theory into practice - apologies to my neighbours!
Sunday, 17 March 2013
Preparing a Project in a DAW
Introduction
This is my second assignment for the Introduction to Music Production course. I am going to look at setting up a project in a Digital Audio Workstation for recording.
I am going to use Audacity and Reaper for this demonstration.
Audacity is a free and open source application that is available for Windows, Linux and the OSX environments. I am using the OSX version of Audacity, the other versions look almost the same.
Reaper is a commercial product for OSX, I am currently using the evaluation version of the software.
I was hoping that version 3.0 of Ardour would have been released for OSX in time to do a comparison over three packages, however currently only the Linux version was available.
Audacity is a free and open source application that is available for Windows, Linux and the OSX environments. I am using the OSX version of Audacity, the other versions look almost the same.
Reaper is a commercial product for OSX, I am currently using the evaluation version of the software.
I was hoping that version 3.0 of Ardour would have been released for OSX in time to do a comparison over three packages, however currently only the Linux version was available.
Setting up a DAW Project
Preproduction Checklist
Before we start our project, we need to consider the following things:
- Where and What
- Digital Audio Preferences
- File Type
- Hardware Settings
- Buffer Size
Audacity
Audacity has a friendly feel to the interface and is very easy and simple to use.
Saving Work
Folders |
Audio Preferences
Sample Rate and Size |
I have set the sample rate to 44.1kHz and the sample size to 24-bit.
This is a higher rate and larger word size than used in CD quality recordings.
This is a higher rate and larger word size than used in CD quality recordings.
File Type
Audacity uses it's own default file type that keeps all data about the recording in a project file and folder. It is possible to name individual tracks on the recording.
Hardware Settings
Recording hardware selected |
I am recording from my mixing desk, it shows as USB Audio CODEC in the lists.
Buffer Size
Buffer Size |
Audacity gives a buffer size in mS, not the number of samples and I am leaving at the default 100mS.
Reaper
Reaper has far more options than Audacity, and provides a more professional seeming interface, although not all of the options match up with the descriptions given in the lectures.
Saving Work
I have selected a 'ReaperRecordings' folder for saving the files produced by Reaper.
Audio Preferences
I have selected a 44.1 kHz sample rate with a 24 bit sample size for the recordings.
File Type
Project Save Settings |
I have set Reaper to use a WAF format for saving, there are several other options available.
Hardware Settings
Hardware Settings |
I am using the USB CODEC for my mixing desk.
Reaper has an option to request a sample rate, the default was 48,000.
Buffer Size
Buffering Options |
Reaper does not seem to have an option for the buffer size in the same way as the lectures suggest.
Reflections
As with everything involved with computers, there are many different ways of describing and doing the same tasks. Using a DAW is much the same with the two packages looked at having a different look and feel.
I'd like to thank the reviewers for taking the time to read through my resources, I hope you gain as much from the tasks as I have while preparing this.
I'd like to thank the reviewers for taking the time to read through my resources, I hope you gain as much from the tasks as I have while preparing this.
Songwriting Week 2
This week has been looking at number of lines to create a feel within a song.
The assignment was on having a stable chorus with an unstable verse. I'm not going to post my efforts here until after the assignment has been graded, and depending on the reviews I might not even then! The title is "The Runaway" and is further explorations on the theme.
I started looking at the idea of the song a few months ago (I was at the Ketton Ox in Yarm near Middlesbrough at an open acoustic night when the idea struck me), and have had two or three attempts at putting words together for it
I'm still finding the unit interesting, but really need to organise my time better; especially as I have another course starting in April.
Coming up with ideas for lyrics may be something that I'm capable of, but learning enough musical theory and practice to create the accompanying melody is going to be a little more challenging. I also need to make more time to continue learning the guitar, I feel that I've barely picked it up in the last month or so.
Now to look at my assignment for the Music Production course that is also due soon...
The assignment was on having a stable chorus with an unstable verse. I'm not going to post my efforts here until after the assignment has been graded, and depending on the reviews I might not even then! The title is "The Runaway" and is further explorations on the theme.
I started looking at the idea of the song a few months ago (I was at the Ketton Ox in Yarm near Middlesbrough at an open acoustic night when the idea struck me), and have had two or three attempts at putting words together for it
I'm still finding the unit interesting, but really need to organise my time better; especially as I have another course starting in April.
Coming up with ideas for lyrics may be something that I'm capable of, but learning enough musical theory and practice to create the accompanying melody is going to be a little more challenging. I also need to make more time to continue learning the guitar, I feel that I've barely picked it up in the last month or so.
Now to look at my assignment for the Music Production course that is also due soon...
Sunday, 10 March 2013
Music Production week 2
I've decided that I'm not a fan of working Saturdays with a day off mid-week.
It probably wasn't helped that this last few days have been particularly busy for me, with going to an event in Newcastle after the Cub Scout meeting on Friday, followed by working Saturday then going to a party on Saturday night.
I have caught up with the Music Production videos early this week, and have completed the quizzes on a sensible day for a change. I just have to do the reviews for the week 1 assignment and prepare my assignment for week 2.
This weeks lectures have been about making edits using a DAW and how the midi controllers send messages. Although again there were lots of videos to watch, they were only a minute or so each and worked very well in the small bites. It gives time to have a try at the ideas and techniques using the software that you have on your own machine.
I am planning on leaving the assignment until Wednesday before starting, I seem to have a free evening and intend to make good use of it to so more preparation for the second assignment. Although I might also make good use of it by seeing Lynn for a couple of hours.
It probably wasn't helped that this last few days have been particularly busy for me, with going to an event in Newcastle after the Cub Scout meeting on Friday, followed by working Saturday then going to a party on Saturday night.
I have caught up with the Music Production videos early this week, and have completed the quizzes on a sensible day for a change. I just have to do the reviews for the week 1 assignment and prepare my assignment for week 2.
This weeks lectures have been about making edits using a DAW and how the midi controllers send messages. Although again there were lots of videos to watch, they were only a minute or so each and worked very well in the small bites. It gives time to have a try at the ideas and techniques using the software that you have on your own machine.
I am planning on leaving the assignment until Wednesday before starting, I seem to have a free evening and intend to make good use of it to so more preparation for the second assignment. Although I might also make good use of it by seeing Lynn for a couple of hours.
- Prepare a project in your DAW using the project checklist from the material as your guidelines.
- Record audio in your DAW including preparing the project, creating the track(s), setting the click and countoff, and recording efficiently.
- Perform the important editing tasks in your DAW including: trim, separate, crossfade, merge, grid, cycle, markers, zoom, name and color.
- Add a software instrument and record MIDI and quantize in your DAW. Including preparing the track(s), adding the instrument, setting the click and countoff, and recording efficiently.
- Efficiently create a compile from multiple audio recordings in your DAW.
- The Analog to Digital conversion process.
- Editing an imperfect audio performance to correct the timing.
How To: Recording an Electric Guitar or Bass without an Amplifier.
Introduction
I'm Neil Stoker, from Washington in the North East of England.This lesson is for week 1 of Introduction To Music Production at Coursera.org. I am going to do a brief How To on recording an Electric Guitar without an amplifier.
I am going to describe recording a traditional guitar track, House of the Rising Sun, using my electro-acoustic guitar and include some audio clips during the process. For the examples, please focus on the quality of the audio and try to ignore the quality of the playing.
Lesson
Before you can record an electric guitar, you need to be able to convert the signals from the guitar or bass into signals that the computer understands. I have an instrument to USB adaptor that performs this conversion, and also have the use of a mixing desk with a built in USB interface.
You also need some audio recording software. I use a program called Audacity for the recording, this has the advantage of being free software and is available on PC, Linux and OSX machines.
A nieve solution using a built in microphone
It is possible to record audio using a built in microphone on a computer, but there are several problems with the audio. You can clearly hear additional noise in the background of the playing. Clip 1
Using a USB Interface
An Instrument - USB Interface |
In these examples I am using a USB interface to connect between the guitar and the computer. I am still using Audacity to carry out the recordings.
The adaptor is simple to set up, and converts the analog guitar signal into the digital signals that a computer understands.
This is a cheap and effective method for a solo guitarist to create a recording, however a significant amount of work will be required for a multi-instrument version to be created.
This is the recording of the track using the USB interface, the audio levels are similar but without the background noise.
This is the recording of the track using the USB interface, the audio levels are similar but without the background noise.
It is possible to create a multi-track recording by laying down additional tracks, in Some Folks Do I recorded two guitar tracks using the USB interface and the two singers were each recorded in separate sessions. I don't remember the number of takes, but it did take several hours of recording and re-recording until we were satisfied - or just possibly we'd had enough!
Forlorn intentions
Alto ZMX164 FX USB Mixing desk |
I had planned on using a mixing desk to produce a version and talk through the steps taking to record the guitar track, however I had some technical difficulties with getting the audio to record at a reasonable level from Audacity over the USB interface.
What I didn't think about in time for completing the main part of the assignment was to use the phono (RCA) tape mix outputs to feed into the microphone socket on the laptop. I am hoping that I will get some time on Monday evening to finish this off before the deadline.
The general steps I would be taken would have been:
- Make sure all connections are made with all equipment powered off. This is to prevent sudden noises from potentially damaging your speakers and amplifiers.
- Turn all gain and level controls down, and mute all channels if possible
- Power equipment up in the following order
- Instruments
- Mixers
- Amplifiers
- Adjust the gain for the input to get to the +4 line level. Don't rely on gauges, use your ears. You can hear transient distortion long before it will appear on a meter.
- Adjust the studio and main mix outputs to get the desired listening levels.
Reflection
What have I learned?
- You need a really good quality signal to get a decent recording
- It's hard to do a solo recording session
- I can see why good sound engineers are highly sought after, and the most important single skill that they have is their listening
- Batteries fail at the most inopportune time (as if I didn't already know that from my photography)
- Learn at least the basics of how to equipment before wanting to use it for real
Thank you's
I have spent a lot of time on reviewing, rewriting and rerecording the sections of this work, the hardest part was cutting out unnecessary sections. The finishing was done in a rush, I had given myself a set of challenging and interesting scheduling conflicts by taking on a new job and signing up for new courses all around the same time.I'd like to thank everybody that has reviewed my work, and receiving feedback is the best way to learn and develop new skills.
Thursday, 7 March 2013
Music Production Week 1
The second of the courses I've signed up for.
This one was a little more intense than the Songwriting one, and the nineteen lectures in the first week cover topics ranging from propagation of sound to how to connect microphones and instruments into a system.
There were seven quizzes too, covering propagation, amplitude, frequency, visualising sound, microphones, cables and signals. I have managed to get what I class as a satisfactory mark for the quizzes, so I'm feeling pleased about that.
Some of the theory I was familiar with, could be something to do with the training I received as a telecommunications engineer when I was with BT (although it was known as "Post Office Telecommunications" when I first joined).
The peer review assessment is to select a topic and prepare materials to help teach the topic. The lesson can be in a variety of formats including a pdf document, a video, a screen movie with voice-over, text with diagrams, a blog post, a powerpoint... Basically almost any method that you want to.
The topics that can be chosen are:
I think I know what I'm going to be doing on Sunday, there is no chance of me doing any tomorrow or Saturday because I'm thinking about going to the Epic Powwow after the Cub Scout meeting tomorrow night and I'm working on Saturday and have a party to go to that night too.
I think it's time I should be heading to bed, I've an 6am alarm for work tomorrow.
This one was a little more intense than the Songwriting one, and the nineteen lectures in the first week cover topics ranging from propagation of sound to how to connect microphones and instruments into a system.
There were seven quizzes too, covering propagation, amplitude, frequency, visualising sound, microphones, cables and signals. I have managed to get what I class as a satisfactory mark for the quizzes, so I'm feeling pleased about that.
Some of the theory I was familiar with, could be something to do with the training I received as a telecommunications engineer when I was with BT (although it was known as "Post Office Telecommunications" when I first joined).
The peer review assessment is to select a topic and prepare materials to help teach the topic. The lesson can be in a variety of formats including a pdf document, a video, a screen movie with voice-over, text with diagrams, a blog post, a powerpoint... Basically almost any method that you want to.
The topics that can be chosen are:
- Audio Basics: Propagation, Amplitude, Frequency, and Timbre. (you can do a broad overview or focus on a single parameter of sound)
- Microphone Basics: Type, Frequency Response, and Polar Pattern. (you can do a broad overview or focus on a single aspect of microphones)
- Visualizing Sound
- Type and Usage of Important Studio Cables.
- Typical Recording Signal Flow Using Your Own Equipment.
- How To: Recording Spoken Word.
- How To: Recording an Acoustic Instrument.
- How To: Recording an Electronic Instrument.
- How To: Recording an Electric Guitar or Bass without an Amplifier.
- How To: Recording an Electric Guitar or Bass with an Amplifier.
I think I know what I'm going to be doing on Sunday, there is no chance of me doing any tomorrow or Saturday because I'm thinking about going to the Epic Powwow after the Cub Scout meeting tomorrow night and I'm working on Saturday and have a party to go to that night too.
I think it's time I should be heading to bed, I've an 6am alarm for work tomorrow.
Songwriting Course Week 1
I have signed up for a couple of online courses recently, and for a change ones that are totally out of my normal field of study (ie not computing ones!).
You won't be too surprised to find out that Songwriting is one of these courses, although I suspect the title of this post might have given it away!
Today was my day off (because I'm working Saturday), and apart from getting a replacement oven and a mooch around Dalton Park, I have spent some time in watching the lectures for the course.
The course is structured around video's, with quizzes to back up the ideas in the lecture followed by an assessed piece of coursework.
There are several songs that the quizzes refer to, and YouTube is a big help as I didn't have any of the songs quoted in my collection!
The lectures looked at the structure of songs, how to develop ideas in songs and different points of views. You mustn't forget the six best friends of songwriting: Who What Where When Why and How - these are probably best friends of authors too.
I'm sitting writing this while Lynn is cooking tea, and I intend on starting on the other course I signed up for this evening. I might have to push myself fairly hard to try and get it completed tonight too, especially as I haven't checked the deadlines for it out yet!
You won't be too surprised to find out that Songwriting is one of these courses, although I suspect the title of this post might have given it away!
Today was my day off (because I'm working Saturday), and apart from getting a replacement oven and a mooch around Dalton Park, I have spent some time in watching the lectures for the course.
The course is structured around video's, with quizzes to back up the ideas in the lecture followed by an assessed piece of coursework.
There are several songs that the quizzes refer to, and YouTube is a big help as I didn't have any of the songs quoted in my collection!
The lectures looked at the structure of songs, how to develop ideas in songs and different points of views. You mustn't forget the six best friends of songwriting: Who What Where When Why and How - these are probably best friends of authors too.
I'm sitting writing this while Lynn is cooking tea, and I intend on starting on the other course I signed up for this evening. I might have to push myself fairly hard to try and get it completed tonight too, especially as I haven't checked the deadlines for it out yet!
The songs
There were only two of the songs that I recognised Eleanor Rigby and The Great Pretender, although it was the Freddy Mercury version I had heard before.
One or two I though might be doable as a guitar soloist, and when I get my skills up enough I intend to give a try - open acoustic events beware!
- "Eleanor Rigby" (John Lennon/Paul McCartney) performed by The Beatles
- "One More Dollar" (Gillian Welch) performed by Gillian Welch
- "Still Crazy After All These Years" (Paul Simon) performed by Paul Simon
- "In Front of the Alamo" (Gary Burr) performed by Hal Ketchum
- "It Was a Very Good Year" (Ervin Drake) performed by Frank Sinatra)
- "For No One" (John Lennon/Paul McCartney) performed by The Beatles
- "What’ll I do?" (Irving Berlin) performed by Linda Ronstadt
- "Can’t Be Really Gone" (Gary Burr) performed by Tim McGraw
- "Judgement of the Moon and Stars (Ludwig's Tune)" (Joni Mitchell) performed by Joni Mitchell
- "I Can’t Make You Love Me" (Mike Reid/Allen Shamblin) performed by Bonnie Raitt
- "The Great Pretender" (Buck Ram) performed by The Platters
- "Strawberry Wine" (Matraca Berg/Gary Harrison) performed by Deana Carter
- "Why Can't I Have You?" (Ric Ocasek) performed by The Cars
Saturday, 23 February 2013
Not much progress and other thoughts
Over the past three weeks or so I've been a little busy and haven't hooked the guitar to my PS. The main reason is that I've been training to be a Customer Services Adviser for an energy company, and have spent the last week "live" taking customers queries and resolving them.
There is a huge difference between running through how to use SAP to get information and to resolve queries in training and when you are live on the phones. Thankfully there are lots of very experienced floor walkers that are available to help us when we hit things we're not sure about doing.
I have had a brief investigation into how to use my new mixing desk, and an still working out the best way to record what is coming out of the system. When I get it sussed, be warned that there might be a flurry of tracks posted to my SoundCloud account.
Another reason for me to add music, is that I have signed up for Coursera online courses in Songwriting and Music Production. These are two separate courses that are expected to take up around 8 hours each through a week. I think that will strain me to the limit fitting around my work and Scouting activities, and I suspect that I'll be spending most of my weekends trying to play catch up!
My girlfriend has also signed up for the Songwriting course, and it seems possible that we're going to have a go at collaborating on songs -for those you'll have to keep an eye out for the Heron Hymn SoundCloud pages.
I'm planning on getting the PS booted up at some point this weekend, and I'm expecting that my playing will have atrophied. I have been practicing a couple of the tunes I have more or less learned (mainly House of the Rising Song [a very simplified version] and Home On The Range, although some Christmas and nursery tunes have also been picked out).
Getting my fingers flexible enough to play chords properly is a challenge for me at the moment.
Of all the bizarre questions I've had recently, one was from a girl I was tutoring Maths and English last year and it was could I teach her to play the keyboards. I did point out that I don't know how to play them, but she seemed determined that she wanted to have a go.
I guess I'll need to dig out my keyboard and power supply and start with the basics myself too. I'm not sure where I'm going to fit in all of this into my week.
Just remember: if you don't try you'll never succeed!
There is a huge difference between running through how to use SAP to get information and to resolve queries in training and when you are live on the phones. Thankfully there are lots of very experienced floor walkers that are available to help us when we hit things we're not sure about doing.
I have had a brief investigation into how to use my new mixing desk, and an still working out the best way to record what is coming out of the system. When I get it sussed, be warned that there might be a flurry of tracks posted to my SoundCloud account.
Another reason for me to add music, is that I have signed up for Coursera online courses in Songwriting and Music Production. These are two separate courses that are expected to take up around 8 hours each through a week. I think that will strain me to the limit fitting around my work and Scouting activities, and I suspect that I'll be spending most of my weekends trying to play catch up!
My girlfriend has also signed up for the Songwriting course, and it seems possible that we're going to have a go at collaborating on songs -for those you'll have to keep an eye out for the Heron Hymn SoundCloud pages.
I'm planning on getting the PS booted up at some point this weekend, and I'm expecting that my playing will have atrophied. I have been practicing a couple of the tunes I have more or less learned (mainly House of the Rising Song [a very simplified version] and Home On The Range, although some Christmas and nursery tunes have also been picked out).
Getting my fingers flexible enough to play chords properly is a challenge for me at the moment.
Of all the bizarre questions I've had recently, one was from a girl I was tutoring Maths and English last year and it was could I teach her to play the keyboards. I did point out that I don't know how to play them, but she seemed determined that she wanted to have a go.
I guess I'll need to dig out my keyboard and power supply and start with the basics myself too. I'm not sure where I'm going to fit in all of this into my week.
Just remember: if you don't try you'll never succeed!
Saturday, 2 February 2013
Not the planned weekend
Disappointment
I was wanting to attend the Imagine Cup North East hack event this weekend, but due to a minor technical problem with my oven (ie it has stopped heating things up) I thought I'd better fix it.That did leave me free to attend the cub meeting last night, and the leader meeting straight after (which only lasted half an hour - not a common event as most of the leaders can talk for England - me especially!)
Mission only partially successful, I have isolated the faulty part: the heating element has gone open circuit. I've also discovered two ways of getting at the element to replace it.
The first way involves stripping the oven almost into individual components, and the other is which panels that need to be removed to do the job.
I'm hoping that I will be able to remember which order it has to be done in when I get the replacement part and fit it.
For a change I only have two spare screws after re-assembling the oven.
Progress
I have had a technically successful session with Guitar Smith and have passed another section. More details than you really want to catch are in my other blog.What other news? I'm three weeks into my five week training to be a customer support adviser, and will be on the phones for at least one call on the last day.
I have recorded a version of the guitar part for House Of The Rising Sun and uploaded to SoundCloud.
Coursework
Absolutely no progress with the database course today. I'm going to have to stand behind myself and crack the whip, as I have over an hours worth of lectures to watch and the associated exercises to complete to continue my progress.
There is a mid-course exam coming up soon, and I'm not looking forward to that at the moment. I think that it will be the ruination of my 100% success rate of doing the practical work.
Wednesday, 30 January 2013
Still making progress
Database course
The topic I'm currently working on for my online courses is Relational Algebra.The big grin you'd see on my face at the moment is because I got 100% in the quiz, and also 100% in the exercises.
I have also completed 3 of the 4 challenge level exercises, and have 75% for those. Bearing in mind I haven't started the last question, I can't complain too much about that now, can I?
Customer Services Advisor Training
We've just passed hump day on the training, 2 1/2 weeks completed, 2 1/2 weeks to go.
The billing quiz was on Monday, and everybody in our team passed (although nobody managed 100% - spoiling my record). Getting the billing aspects right is rather important, as it will reduce the number of calls and complaints received.
Today we have been looking at setting up customer contracts, but had a minor technical hitch: the systems went down mid afternoon preventing us from using the training environment.
Other news?
My oven has packed in, I am going to try to find time to find out what is wrong either tomorrow night, or over the weekend. I suspect the heating element has failed, the fan and thermostat seems to be doing something. It would be easier just to get a new oven, but cash is rather tight at the moment.
I've not had time to play my guitar smith game this week, as I've been focussing on the coursera work. Once I've finished playing with the oven and get the next block of lectures watched and quizzes completed I think I'll be playing more.
Heron Hymn might be having a go at recording a simple song or two this weekend depending on enthusiasm (but it will be something like Home On The Range, My Grandfathers Clock or a Christmas carol or two.
Oh yes, it's 11:15pm in the uk, and I still have a 6am alarm. Sleep? Who needs it!
Oh yes, it's 11:15pm in the uk, and I still have a 6am alarm. Sleep? Who needs it!
Labels:
coursera,
CSA training,
database,
oven,
relational algebra
Sunday, 27 January 2013
Some progress with the course
The JSON lectures and quiz weren't as difficult as I thought they might be.
I managed to get 4/4 for the quiz, so that's ok.
My progress so far:
Sitting at 100% overall at the early stages of the course is a good place to be I think.
I managed to get 4/4 for the quiz, so that's ok.
My progress so far:
XML Quiz | 6/6 |
JSON Quiz | 4/4 |
DTD Exercises | 3/3 |
But first, I have a 6am alarm and it's 11:25 in the UK so I think it would be a good time to get some sleep.
Bad week for learning
The post title more or less says it all.
I have made absolutely no progress with the Database course I am signed up for this week. I only have two quizzes and some practical work to complete for tomorrow.
If they weren't all online, I'd log off the net to avoid distractions - like email, facebook and twitter.
A cuppa, a bacon sarnie then time to do the work.
I have made absolutely no progress with the Database course I am signed up for this week. I only have two quizzes and some practical work to complete for tomorrow.
If they weren't all online, I'd log off the net to avoid distractions - like email, facebook and twitter.
A cuppa, a bacon sarnie then time to do the work.
Sunday, 20 January 2013
A nice treat
I was taken out last night for an early birthday meal, always a very nice treat.
We went to Thai Central on Ocean Road in South Shields.
The only regret I have about the meal is that I didn't take a picture of the food before we piled in and demolished it.
The food was extremely well presented, and very, very tasty. We'll definitely be coming back for another visit.
We went to Thai Central on Ocean Road in South Shields.
The only regret I have about the meal is that I didn't take a picture of the food before we piled in and demolished it.
The food was extremely well presented, and very, very tasty. We'll definitely be coming back for another visit.
Friday, 11 January 2013
Busy night
For some time Heron and Hymn have been saying we should have a night a week to practice something.
The main problem is my lack of guitar skills (we're not going to comment on my singing tonight).
On my other blog I have started commenting on my progress with the Guitar Smith game. Lynn was singing along to the track I'm trying to earn enough points to qualify (and although there is an option to reduce the qualification barrier, I'm refusing to use it).
As well as singing, Lynn has been quite productive and has written a short story based on an earlier discussion, and is well underway with a second one.
I was going to head to bed (it's just passed midnight here in the UK), but don't want to disturb the creative juices.
I've just realised I haven't finished my glass of wine either. So no driving for me before 9am then. Not that I was even planning on getting out of bed before then.
The main problem is my lack of guitar skills (we're not going to comment on my singing tonight).
On my other blog I have started commenting on my progress with the Guitar Smith game. Lynn was singing along to the track I'm trying to earn enough points to qualify (and although there is an option to reduce the qualification barrier, I'm refusing to use it).
As well as singing, Lynn has been quite productive and has written a short story based on an earlier discussion, and is well underway with a second one.
I was going to head to bed (it's just passed midnight here in the UK), but don't want to disturb the creative juices.
I've just realised I haven't finished my glass of wine either. So no driving for me before 9am then. Not that I was even planning on getting out of bed before then.
Sunday, 6 January 2013
23 Things in 2013
I've just been reading
John Anealio's blog entry 'Will you take the “23 in '13”Challange?'.
I have decided to give
it a go, but instead of 23 items in a single theme, I am going to do
a bit of a mix and match on the challenge.
I do have some specific
things in mind, though.
- Spend more time learning the guitar (sorry neighbours!) and get to the point where I can reliably play a number of songs
- To do a public performance of my guitar work as part of Heron Hymn (with North East Live first, because I promised Angie she'd get our first public performance)
- To record and publish on Soundcloud some of the songs I have learned
- To plan and write at least the outline of a novel (and I have started on this, but only just)
- To complete my laser fence prototype, and create a custom PCB and have a permanent version of the game
- To get at least three dynamic SaaS style websites to an operational level
- To blog at least once a month for the year (but this will only count as one of the 23 items)
I was tempted to have
read more, but as I have already finished half a dozen books this year
already and finishing 23 books this year would not be a significant
challenge!
Subscribe to:
Posts (Atom)